ESAB EMP235ic - Power Source and Wire Feeder Cleaning

7 MAINTENANCE
0463 479 001
- 36 -
© ESAB AB 2017
Interval Area to maintain
Every 3 months
Clean or replace
unreadable labels.
Clean weld
terminals.
Check or replace weld cables.
Every 6 months
Clean inside
equipment.
7.2 Power source and wire feeder maintenance
Perform a power source cleaning each time you replace a Ø4in. (100mm), Ø8in. (200mm)
or Ø12in. (300mm) wire bobbin.