ESAB EMP235ic - Wear Parts and Accessories

WEAR PARTS
0463 479 001
- 123 -
© ESAB AB 2017
WEAR PARTS
Item Ordering no. Denomination Wire type Wire dimensions
1 0558 102 515 Brass outlet
assembly
N/A N/A
1 0558 102 516 Wire outlet guide Fe/SS/Flux
Cored
0.024in./0.030in.
(0.6mm/0.8mm)
0558 102 517 Wire outlet guide Fe/SS/Flux
Cored
0.035in./0.052in.
(0.9mm/1.3mm)
3 0558 102 328 Wire inlet guide Fe/SS/Flux
Cored
0.024in./0.030in./0.035in./
0.045in. (0.6mm/0.8mm/
0.9mm/1.2mm)
4 0558 102 457 Key-drive shaft
crescent
N/A N/A
5 7977036 Feed roll “V”
groove
Fe/SS 0.024in./0.030in.
(0.6mm/0.8mm)
W4014800 Feed roll “V”
groove
Fe/SS 0.024in./0.035in.
(0.6mm/0.9mm)
7977732 Feed roll “V”
knurled
Flux Cored 0.030in./0.035in.
(0.8mm/0.9mm)
0367 556 006 Feed roll "V"
knurled
Flux Cored 0.045in. (1.1mm)
7977731 Feed roll "U" Alum 0.030in./0.035in.
(0.8mm/0.9mm)
7977264 Feed roll "U" Alum 0.040in./3/64in. (1.0mm/1.2mm)
6 0558 102 518 Locking knob N/A N/A
7 0558 102 329 Wire tension knob N/A N/A
8 0558 102 331 Pressure arm
complete assembly
N/A N/A
9 0558 102 330 Screw N/A N/A
10 0558 102 333 MIG gun locking
knob
N/A N/A