T-IM114b P17/62
T20
Series
OPERATION TABLE
contained within them during use. For accessories that fit
onto the side rails ensure that they are compatible with the
side rails fitted to these tables. These tables can be supplied
with standard UK, USA or Denyer style side rails.
4.5 Manual handling
WARNING
Ensure care is taken when moving adjusting
or lifting any part of the table or patient. Note
the guidelines provided.
4.5.1 During adjustment or changing the configuration
of the T20 series of operation tables, there are occasions
when the user should be aware of the safe practises to be
employed during manual handling or adjustment of parts
of the table. For information, the weights of the heaviest
sections and accessories commonly used are listed in
Appendix 4. Appendix 4 also contains other information
on manual handling. When lifting, carrying or fitting these
components it is recommended that care is taken and that
two or more people are employed when required.
4.5.2 These ‘Instructions for use’ advise supporting the
weight of the patient during adjustment of any section,
obviously this requires the intervention of several
personnel, some supporting the patient’s limbs and others
adjusting the table sections.
4.5.3 When moving the table note that extra effort is
required to start the table moving, take care not to strain
limbs or back. The table should not be moved when heavily
loaded note the warnings and cautions provided. It is good
practice to use two or more people when moving a table.