IP Series Installation Manual Function 3: Extension programming
F.5
7. Remote-access IP address
Enter the remote-access IP address for the IP PBX. The display will default to the IP address entered
in Function 82 (see page K.1). If a Remote IP Feature Phone will use this address to connect to the
IP PBX, press # to confirm; if a Remote IP Feature Phone will use an alternate IP address to connect
to the IP PBX, enter that address and press # to confirm. “SAVE PARAMETERS?” will appear on the
display. If you have correctly entered the IP addressing parameters (items 1–7), press # to program
the parameters for any Remote IP Feature Phone; to abort programming, press * to restore the
system parameters to their previously set values.
8. Extension name
This is used for the LCD display, reports, and as a programming aid. The name’s length can be no
longer than 10 characters (See “Entering alphanumeric characters,” page C.2).
Default: The extension number.
9. CO line group
Assigns the extension’s ability to access one or more CO line groups (9, 8, and 71–76).
Default: 9.
10. and 11. Call forward busy/no answer
The extension can be set to call forward busy/no answer to another extension (or department), a
mailbox or a branch ID for day mode and differently for night mode.
Default: The extension’s mailbox.
12. Extension page zone assignment
Remote IP phones cannot participate in any page zones.
13. Operator translation
Extension 0 (Operator) programming requires:
• Programming call forwarding for day and night mode
• Entering the extension number, department, mailbox or branch ID to which calls are to be di-
rected when someone dials 0.
Default: 100.
Important: After completing the extension programming for a new Remote IP Feature Phone,
connect that phone to the IP PBX network. Repeat Function 31 extension pro-
gramming for this extension, pressing # at the appropriate times to confirm
previously entered values. (Performing this step again causes the IP PBX to send
the programming information to the Remote IP Feature Phone.)
To Next Page
Loading...
