Essilor Instruments ALM 800 - Page 26

[Setup] screen - Page 2/4
1. [UV / Blue]
Selects [UV] cut percentage or [BV] cut percentage and [CB] transmittance measurement
[Off]: No measurement
[UV]: Only [UV] cut measurement
[UV+BL]: [UV] and [BV] cut percentage, [CB] transmittance measurement.
2
. [UV Graph]
Selects if displaying [UV] transmission graph or not (displayed only on the progressive lens measurement
screen):
[Off]: Not perform
[On]: Perform
3
.
[Prog. Graph]
Selects if displaying the assessment graph or not:
[Off]: Not display
[On]: Display
4
. [Graph Print]
Selects if printing out the assessment graph after measuring progressive lens:
[Off]: Not print out
[On]: Print out
5
. [Prism]
Selects if displaying prism or not, and selects the unit to be displayed:
[Off]: Not display
[X-Y], [X-Y] display
[P-B]: Prism value – base direction
6
. [Prism (mm)]
Select if displaying prism value of X-Y direction in mm:
[Off]: Not display
[On]: Display
7
. [Abbe]
Selects [Abbe] number:
20
30
40
50
60
USER MANUAL > BEFORE MEASUREMENT
ALM800 - Auto lensmeter > V1 - 05-2020
26