Essilor e-Tess - Page 40

Essilor E-Tess Tracer
5- Automaintenance
40
2
. Select the "Self-tests" function
,
3. Select the tests you want to perform,
4. Start the tests
,
1. An audible signal indicates the end of the tests:
- If the test is OK, the screen displays in zone 2 for each test concerned: ,
Press and continue using your tracer.
- If a test is not OK, the screen displays in zone 2 for each test concerned: .
Jaw test
Feeler restitutor test
Rotation test
Carriage transfer test
Feeler transfer test
All tests
T1 + T2 + T3 + T4 + T5
T2
T3
T4
T5
T1
2
1