Essilor e-Tess User Manual

Essilor E-Tess Tracer
47 6- Import-Export
c. Step 1: from your PC
1. Insert the USB stick supplied by Essilor on a USB port of your PC,
2. Wait for a few seconds until Windows detects the accessory,
3. In the start menu, click on My PC, your stick must be displayed: "removable disk",
4. Double-click on this disk,
5. Copy the file in format .tar.gz sent by your Essilor retailer to the root directory of your stick,
6. Close this disk,
7. At the bottom right of your screen, request the removal of your USB storage peripheral,
8. Wait for confirmation, then remove the stick from your PC,
d. Step 2: from your E-Tess tracer
1. Power up your tracer, switch in position 1,
2. After the initialisation phase, insert the USB stick on the external USB port of your tracer, connector
(3),
3. Press to access the configuration/maintenance menu,
4. Select the "Import-Export" function ,
5. Select the import memory version, then validate ,
6. e-Tess prompts you to confirm the memory update,
7. Check the update version number,
8. Press to validate and start the update or to cancel your request and return to the previous
screen,
9. When the update is finished, e-Tess is ready for a job,
If an error occurred during the operation, refer to Chapter 7.
10. Remove the stick from your tracer.

Essilor e-Tess Specifications

General

Brand	Essilor
Model	e-Tess
Category	GPS
Language	English