6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Configure PC port
Press on “1”, then press on .
If the choice on line 1 does not correspond to your configuration, press on “1”, then press on to choose the transmission
speed in bauds:
9600
19200
38400
57600
115200
Choose the desired speed by navigating the menu using the keys and .
Enter the chosen line number selected, then press on to confirm.
Press on ( ) to exit the menu.
If the choice on line 2 does not correspond to your configuration, press on “2”, then press on to choose the flow test:
: no equipment flow test (usual configuration)
: activated equipment flow test
Configure the edger port
Press on “2”, then press on .
If the choice on line 1 does not correspond to your configuration, press on “1”, then press on to choose the transmission
speed in bauds:
9600
19200 (usual speed)
38400
57600
115200
Choose the desired speed by navigating the menu using the keys and .
Enter the chosen line number selected, then press on to confirm.
Press on ( ) to exit the menu.
If the choice on line 2 does not correspond to your configuration, press on “2”, then press on to choose the flow test:
The display indicates by default:>
If not, it displays the last memorized choice.>
The display indicates by default:>
If not, it displays the last memorized choice.>
To Next Page
Loading...