Figure 3k: Sequence Screen Concentrator Tab
3.9.1 Concentrator #1 (Concentrator #2) : <click> on the Concentrator #1 tab and the
screen will appear as shown in Figure 3k.
Line: This is the sequence line number.
NOTE: The sequence always starts at line 1.
Description: Description may be added by the user for information purposes
only.
Vial: This is the sample tray position.
Method: This is the method to be used for the sample line.
Blank: The number of Centurion water system blanks run prior to the sample in
line.
Runs: The number of runs per vial. Water samples only.
Dilute: The dilution ratio of the sample.
Extract: N/A Option to be released at a later date.
IS: Indicates if the internal standard additions are manually selected from the
Runs Per Vial option. Refer to Runs Per Vial section of 3.9.2 for additional
information.
To Next Page
Loading...
