EST Encon Evolution - 1.2 Product Specifications

of a button. Users can be locked out of this area by an administrator if desired. The complete log
can be viewed at any time showing any errors, trap changes, leak and flow check status etc. This
information is stored until printed or deleted from the system.
1.2 Product Specifications
Major Features
 Modular Flow Control
 Optional Sample Foam Sensor
 Optional Sample Heater for reduced carryover during Bake
 Optional Touch Screen Interface
 High Temperature capability
 Precise Temperature control
 Siltek sample pathway
Dimensions
 17”H x 11”W x 16”D (43.2cm x 27.94cm x 40.6cm)
Weight
 45lbs. (20.4kg)
Indoor Use
 Up to 2000 m altitude
 10°C to 25°C operating temperature
 5°C to 85°C storage temperature
 10 to 90% relative humidity
Programmable Time Ranges
 999.99 min for all timed events
Programmable Temp. Ranges
 Trap: ambient to 270°C
 Transfer Line: ambient to 250°C
 Valve Oven: ambient to 250°C
Trap
 Standard EPA Specified Traps
 Conductive heating/replaceable insert
 Various sorbent materials available for US EPA methods and other applications