Estun ProNet-30D - Servo Motor Dimensional Drawings

ProNet Plus Series AC Servo User's Manual
- 153 -
Voltage
200VAC
Motor model
EM3A-
02A
04A
08A
10A
Hold torque of brake
N·m
1.5
3.2
Encoder
20-bit incremental encoder 1048576P/R
23- bit absolute encoder 8388608P/R
Thermal endurance class
F
Ambient temperature
0 ~ +40℃ (No frozen)
Ambient humidity
20%~80% RH (No condensation)
Anti-vibration performance
Vibration：working 49m/s2（5G）or less；not working24.5m/s2（2.5G）or less
Impact：98m/s2（10G）or less
Protected mode
Fully enclosed, self-cooling, IP65 (equipped with an oil seal, exclude the cable
connection)
Note:
1. The values in parentheses are for servo motors with holding brake.
2. The above specification can be achieved，only if equipped with ProNet-□□□□G and use 220VAC supply
voltage.
3. The above rated torque can be achieved，only if 250mm x 250mm x 6mm aluminum radiator fin is installed and
the ambient temperature is 0-40℃;
4. values with * are the typical values，when the motor is equipped with ProNet-□□□□G and the armature coil
temperature is 100℃
5. Rated output power of the motor with oil seal is reduced to 95%.
7.4 Servo Motor Dimensional Drawings
EMJ dimension
Unit: mm