ProNet Plus Series AC Servo User's Manual
ProNet-15A/20A/10D/15D/20D
Charge indicator
Lights when the main circuit power supply is
ON and stays lit as long as the main circuit
power supply capacitor remains charged.
Main circuit power supply terminals
Connecting terminal of DC reactor
Control power supply terminals
Regenerative resistor
connecting terminals
Ground terminal
Servomotor terminals
Power on indicator
Lights when the control
power supply is on.
Connector for communication
I/O signal connector
Used for reference input signals
and sequence I/O signals.
Encoder connector
Connects to the encoder
in the servomotor.
ProNet-15A/20A/10D/15D/20D-EC
Charge indicator
Lights when the main circuit power supply is
ON and stays lit as long as the main circuit
power supply capacitor remains charged.
Main circuit power supply terminals
Connecting terminal of DC reactor
Control power supply terminals
Regenerative resistor
connecting terminals
Connector for communication
I/O signal connector
Used for reference input signals
and sequence I/O signals.
Encoder connector
Connects to the encoder
in the servomotor.
Power on indicator
Lights when the control
power supply is on.
Servomotor terminals
Ground terminal
Connector for debugging
To Next Page
Loading...