ETAS 5 Instruments
To scroll axes
1. Hover the cursor over the axis that you want to scroll.
2. Use the mouse wheel or the left mouse button to scroll the meas-
urement scale up and down.
Alternatively, click the strip and drag the measurement scale of all
axes up and down.
To zoom axes
1. Hover the cursor over the axis that you want to zoom.
2. Do one of the following:
Press CTRL and use the mouse wheel to zoom out or in.
Press CTRL and the left mouse button. To zoom out or in, move
the cursor up or down.
To adjust the axis range or set a favorite axis range
1. Click the tab Instrument in the Properties window.
2. To define the minimum and the maximum value of an axis, do one
of the following:
For analog signals, enter the desired values in the input fields.
For discrete signals, select the values from the drop-down
menu.
3. To set the values as favorite axis range, click the star in the Set as
Favorite column. When the values are shown in bold and blue, the
current axis range matches to the favorite axis range already.
4. To store all axis range settings, click Save.
5. To apply the favorite axis range, do one of the following:
To apply the favorite axis range to all axes, click .
To apply the favorite axis range to a selected axis or strip, right-
click this item and choose Apply Favorite Axis Range.
5.3.5 Using Cursors
In the scatter plot, two values of the signal are marked by cursors. The cross-
hair indicates the exact position of each cursor. If several strips exist, two hori-
zontal lines per strip are displayed.
MDA V8.5 - User Guide 98
To Next Page
