374 Eos Family Operations Manual
[Sub] [2] MoveTo [Sub 9] [Enter][Enter] - moves the contents, label, and timing data
from submaster 2 and places it in submaster 9. Submaster 2 is removed.
You can copy the contents of a submaster by using the [CopyTo] button.
[Sub] [2] [Copy To] [Sub 9] [Enter][Enter] - copies the contents, label, and timing data from sub-
master 2 and places it in submaster 9.
[Sub] [2] [Copy To] [Sub 9] {Attrs Only} [Enter][Enter] - copies all of the submaster properties
from submaster 2 and places it in submaster 9. Levels, effects, and labels are not copied when
using the {Attrs Only} softkey.
[Sub] [2] [Copy To] [Sub 9] {Labels Only} [Enter][Enter] - copies only the label from submaster 2
and places it in submaster 9.
Releasing Content From a Submaster
To release content from a submaster, use one of the following methods:
Note: On Element 2, you will need to use the {Fader Control} softkey, which displays when
[Live] is pressed.
[Off] & [Load]- stops any running effects and fades out according to the {Restore} mode of the
submaster.
[Release] & [Load] - behaves in the same way as [Off]. [Release] no longer unmaps the fader.
[Shift] & [Load] - behaves like [Off] and [Release] except that it will also unmap the fader.
{Fader Control} {Off} & [Load]- stops any running effects and fades out according to the
{Restore} mode of the submaster.
{Fader Control} {Release} & [Load] - behaves in the same way as {Off}. {Release} no longer
unmaps the fader.
[Shift] & [Load] - behaves like {Off} and {Release} except that it will also unmap the fader.
Note: When a submaster on a motorized fader is released or turned off, the fader will
home.
Updating a Submaster
It is possible to make changes to a submaster in Live mode. [Update] is used to store changes to a
submaster.
[Update] [Sub] [5] [Enter] - updates submaster 5 to include changes in live output only for
channels already in submaster 5. You can also press the bump button for submaster 5 to
select it.
[Channel list] [Update] [Sub] [5] [Enter] - adds only the specified channels to submaster 5.
Deleting a Submaster
You can delete a submaster using the [Delete] key. When a submaster is deleted, the fader remains
configured as a submaster, but it will be empty, unless the {Unmap Faders} softkey is used.
To Next Page
Loading...