514 Eos Family Operations Manual
submaster On. If the submaster is set to a dwell time of Hold, the second trigger will turn the sub-
master Off.
Create an analog input event where an input on address 6 will bump Sub 1.
<Event> [4] [/] [1] {Address} [6] [Sub] [2] {Bump} [Enter]
Fader
Acts as if the input is directly controlling the fader on the submaster. A contact closure will move the
fader from 0 to 100% instantly. A 0-10VDC input will fade the value proportionally, where 0VDC is
the fader at 0%, and 10VDC is the fader at 100%.
Create an analog input event where an input on address 7 will control the fader for Sub 3.
<Event> [4] [/] [1] {Address} [7] [Sub] [3] {Fader} [Enter]
To Next Page
Loading...
