Submasters 411
Example:
[Sub] [2] Move To [Sub 9] [Enter][Enter] - moves the contents, label,
and timing data from submaster 2 and places it in submaster 9.
Submaster 2 is removed.
You can copy the contents of a submaster by using the [Copy To] button.
[Sub] [2] [Copy To] [Sub 9] [Enter][Enter] - copies the contents, label, and timing data
from submaster 2 and places it in submaster 9.
[Sub] [2] [Copy To] [Sub 9] {Attrs Only} [Enter][Enter] - copies all of the submaster
properties from submaster 2 and places it in submaster 9. Levels, effects, and labels are
not copied when using the {Attrs Only} softkey.
[Sub] [2] [Copy To] [Sub 9] {Labels Only} [Enter][Enter] - copies only the label from
submaster 2 and places it in submaster 9.
Releasing Content From a Submaster
To release content from a submaster, use one of the following methods.
[Fader Control] {Off} & [Load]- stops any running effects and fades out according to the
{Restore} mode of the submaster.
[Fader Control] {Release} & [Load] - behaves in the same way as {Off}. {Release} no
longer unmaps the fader.
[Shift] & [Load] - behaves like {Off} and {Release} except that it will also unmap the
fader.
Updating a Submaster
It is possible to make changes to a submaster in Live mode. [Update] is used to store changes
to a submaster.
[Update] [Sub] [5] [Enter] - updates submaster 5 to include changes in live output only
for channels already in submaster 5. You can also press the bump button for submaster
5 to select it.
[Channel list] [Update] [Sub] [5] [Enter] - adds only the specified channels to submaster
5.
Deleting a Submaster
You can delete a submaster using the [Delete] key. When a submaster is deleted, the fader
remains configured as a submaster, but it will be empty, unless the {Unmap Faders} softkey is
used.
[Delete] [Sub] [5] [Enter] [Enter] - deletes the contents of submaster 5.
[Delete] [Sub] [5] {Unmap Faders} [Enter] [Enter] - deletes the contents of submaster 5
and unmaps any faders that are currently mapped to submaster 5.
To Next Page
Loading...
