3 Operation 57
Save DMX as Preset
You can take a snapshot of the incoming DMX signal when the fixture is in HSI mode and
save it as a preset value.
Step 1: On the Presets screen, scroll to Preset and press [].
Figure-3.22 Save the DMX as a Preset.
Step 2: With Preset selected, press [].
Step 3: Press [] or [] to set the desired preset number.
Step 4: Press [].
Step 5: Scroll to Save DMX as Preset and press [].
Presets
Preset: * 23
Status: Active
Fade Tim e: 00:02
Delay Time: 00:00
Edit Color
Copy to Other Fixture
Save DMX as Preset
To Next Page
Loading...
