The gasket on the cover of the recovery tank seals
the tank properly, providing a better vacuum
performance on the squeegee.
For this reason, it is very important to keep the
gasket intact in order for the machine to work
properly.
Follow the instructions below to clean and check the
gasket:
• Open the cover (pos. 1);
• Use a piece of cloth to wipe off the gasket (pos.
2). Make sure it is not cut or damaged;
• If the gasket is damaged, remove it from its
housing on the cover and mount a new gasket;
• Clean the area of the tank where the gasket rests
(pos. 3) when the cover is closed.
To Next Page
Loading...
