Eureka E75/2 - Battery Recharging Methods

13
RECHARGING BATTERIES USING AN EXTERNAL CHARGER
1
2
3
4
Follow the instructions below to charge the batteries:
• Stop the machine in a levelled area and turn it off;
• Make sure to read the battery charger instruction
manual before charging the batteries;
• When charging the battery always do so in a well-
ventilated area;
• Open the hood of the seat (pos. 4), unplug the mobile
connector (pos. 3) and connect it to the battery charger
connector (pos. 2);
• Charge the batteries at no more than one twentieth of their
rated capacity;
• Once the batteries are charged make sure to check the
electrolyte level and if necessary fill it up only using
distilled water;
• Reconnect the mobile connector (pos. 3) to the fixed
connector (pos. 1);
• It is recommended to read the battery user manual for
further advice on charging the batteries;
• The gas released during the charging process can cause
explosions if it meets flames or sparks;
• Battery acid should never come into contact with the eyes, skin or clothes. Make sure to wear goggles, gloves and appropriate
clothing;
• In case of contact wash thoroughly with water;
• Do not place metal objects on the battery;
• Do not fill the battery with sulphuric acid or other products.
RECHARGING BATTERIES USING THE CHARGER
ONBOARD THE MACHINE (OPTIONAL)
Follow the instructions below to charge the batteries:
• Stop the machine in a levelled area and turn it off;
• Before charging the battery make sure to read the battery
charger instruction manual supplied with the machine;
• When charging the battery always do so in a well ventilated
area;
• Open the hood of the seat (pos. 3);
• Open the hood containing the charger pos.2. CHARGER HOOD
MUST REMAIN OPEN FOR THE DURATION OF CHARGE.
• Uncoil the cable from the cable reel located on the battery charger
and connect the plug (pos. 1) into a standard power socket;
WARNING: WHEN PLUGGING THE BATTERY
CHARGER INTO THE ELECTRICAL SOCKET, THE
MACHINE FUNCTIONS ARE AUTOMATICALLY
DISABLED;
• At the top of the charger are located two LEDs and a button. While
charging the battery the red LED CHARGE (pos 4) turns on. Once
the battery charging is completed the green LED STOP lights (Pos.
5). To stop charging press the red button STOP (pos. 6). Once the
charging is stopped the green LED STOP (pos. 5) lights. To resume
charging disconnect the mains plug and plug it again;
• Once the batteries are charged, make sure to check the electrolyte level and if necessary fill it up only using distilled water;
• The gas released during the charging process can cause explosions if it meets flames or sparks;
• Battery acid should never come into contact with the eyes, skin or clothes. Make sure to wear goggles, gloves and appropriate
clothing;
• In case of contact, wash thoroughly with water;
• Do not place metal objects on the battery;
• Do not fill the battery with sulphuric acid or other products.