CLEANING INSTRUCTIONS ECO-SYSTEM
At the end of each working day take the machine to the tank draining area, turn off the key and activate the
parking brake.
Empty and wash the recovery tank.
Remove and wash carefully the ECO-SYSTEM filter.
At this point start the ECO-SYSTEM clearing cycle as follows:
With the machine turned off hold the ECO-
SYSTEM button, turn the key in pos.1. Hold the
button till the word cLEA appears on the display.
Pour water in the base of the ECO-SYSTEM to
allow the complete washing of it (pipes, valve,
pump).
The cleaning operation will last about 40 seconds.
If this time is not enough, repeat the complete
cycle.
To restore the normal functions of the machine, turn off and on the key.
REASSEMBLE THE ECO-SYSTEM FILTER.
To Next Page
Loading...
