Eureka E85 - CLEANING THE DETERGENT SOLUTION FILTER

26
CLEANING THE DETERGENT SOLUTION FILTER
The machine is fitted with a filter on the pipe that comes from the detergent solution tank.
In theory, the solution located in this tank should not have any impurities as the buckets or containers used to fill the
solution are supposed to be clean, in addition there is a filter in the mouth of the tank that filters the water
Follow the instructions below to clean the filter
 Bring the machine into a stop position in a flat surface area and put
on the brake;
 Turn off the machine and remove the key;
 Close the valve pos.1;
 Remove the transparent cup pos.2.
 Remove the protective screen (see position 3) and clean it with water together with the cup;
 Put the cup (see position 2) and the protective screen (see position 3) on the fixed part of the filter (see position 4);
make sure the protective screen is fitted correctly into its housing inside the cup and into the support;
 Open the valve pos.1.