EasyManua.ls Logo

Eureka E85 User Manual

Eureka E85
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2
TABLE OF CONTENTS
Topic
PAGE
INTRODUCTION
3
MACHINE IDENTIFICATION
3
WARNINGS
4
GENERAL WARNINGS AND RECOMMENDATIONS
4
DISPOSAL
7
TRANSPORT AND MOVEMENT
7
UNPACKING
8
BATTERIES INSTALLATION
9
MACHINE DESCRIPTION
11
PRIMARY FUNCTIONS AND CONTROLS
13
MACHINE SETTING
16
MOUNTING THE SQUEEGEE
16
ADJUSTING THE SQUEEGEE
16
MOUNTING THE ABRASIVE DISC ONTO THE DISC PAD HOLDER
18
BRUSHES/ ABRASIVE DISC INSTALLATION
18
FILLING THE DETERGENT SOLUTION TANK
19
ADJUSTING THE DETERGENT SOLUTION ON THE BRUSHES
20
SPLASH GUARD LIFTING FOR PRE-WASHING
20
USING THE MACHINE
21
CHECK BEFORE USE
21
OPERATION
21
PERIODIC SERVICING
22
DRAINING AND CLEANING THE RECOVERY TANK
23
CLEANING INSTRUCTIONS ECO-SYSTEM
24
DRAINING AND CLEANING THE SOLUTION TANK
25
CHECKING BRUSHES OR ABRASIVE DISCS
25
CLEANING THE DETERGENT SOLUTION FILTER
26
CLEANING, REPLACING AND CHECKING THE INSTALLATION OF THE SQUEEGEE BLADES
27
SPLASH GUARD BLADES ROTATION/REPLACEMENT
29
CLEANING THE JOINT OF THE SOLUTION DOSING DEVICE
30
CHECKING AND REPLACING FUSES
31
GREASING POINTS
32
CLEANING THE SUCTION FILTER
33
CHECKING THE SEAL ON THE COVER
33
RECHARGING BATTERIES
34
CHECKING AND REPLACEMENT OF MOTOREDUCER OIL
35
DIMENSIONAL TECHNICAL DRAWINGS
35
TECHNICAL CHART
36
RECOMMENDED SPARE PARTS
37
TROUBLE-SHOOTING CHART
39
ALARMS
41
PRODUCT WARRANTY
42
INSTALLATION FORM FOR WARRANTY APPROVAL
43
DECLARATION OF CONFORMITY
44
DATE OF THE LAST UPDATE: 18-07-11
Question and Answer IconNeed help?

Do you have a question about the Eureka E85 and is the answer not in the manual?

Eureka E85 Specifications

General IconGeneral
BrandEureka
ModelE85
CategoryScrubber
LanguageEnglish

Summary

INTRODUCTION

MACHINE IDENTIFICATION

Identifies the machine and manufacturer via three plates.

SAFETY AND OPERATOR GUIDELINES

GENERAL WARNINGS AND ADVICE

Important warnings, danger signs, and emergency situation guidelines.

OPERATOR AND TECHNICIAN PRECAUTIONS

Detailed safety measures for operators and technicians.

OWNER AND OPERATOR RESPONSIBILITIES

Defines obligations for machine owners and day-to-day operator duties.

CLEANING AND MAINTENANCE

STORING THE MACHINE

Procedures for storing the machine during long periods of inactivity.

DISPOSAL AND TRANSPORT

DISPOSAL PROCEDURES

Guidelines for proper disposal of spent oils, batteries, and the machine.

TRANSPORT AND HANDLING

Instructions for safe machine transport, including temperature considerations and manual pushing.

UNPACKING

UNPACKING PROCEDURES

Steps to safely remove the machine from its packaging.

BATTERY INSTALLATION

BATTERY INSTALLATION STEPS

Detailed instructions for mounting and connecting batteries.

BATTERY CONNECTION

How to connect battery cables correctly to the machine.

PRIMARY FUNCTIONS AND CONTROLS

CONTROL PANEL OVERVIEW

Explanation of buttons and indicators on the control panel.

OPERATIONAL BUTTONS AND INDICATORS

Details on using various buttons like Hour Meter, Battery Level, ECO-SYSTEM, Suction Fan, and Water Adjustment.

ADDITIONAL CONTROLS AND WARNINGS

Covers warning symbols, emergency button, indicator lights, gear switches, horn, ignition, and brakes.

MACHINE SETTING

MOUNTING THE SQUEEGEE

Step-by-step guide to attach the squeegee to the machine.

ADJUSTING THE SQUEEGEE

How to adjust squeegee inclination and pressure for optimal performance.

SQUEEGEE ADJUSTMENT DETAILS

Illustrates squeegee positioning for normal operation and wall proximity.

MOUNTING ABRASIVE DISCS

Instructions for attaching abrasive discs to the disc pad holder.

ENGAGING AND RELEASING BRUSHES/DISCS

How to attach and detach brushes or abrasive discs.

FILLING THE DETERGENT SOLUTION TANK

DETERGENT TANK FILLING PROCEDURES

Step-by-step guide to fill the detergent solution tank safely.

USING THE MACHINE

ADJUSTING SOLUTION QUANTITY

How to set the water and detergent flow rate for brushes.

LIFTING SPLASHGUARD FOR PRE-WASHING

Procedure to lift the splashguard for pre-washing dirty surfaces.

CHECK BEFORE USE

Pre-operation checks to ensure the machine is ready.

OPERATING THE MACHINE

How to start, operate, and stop the machine's functions.

ADVANCED OPERATION AND SHUTDOWN

Details on ECO-SYSTEM, pre-wash, and shutdown procedures.

PERIODIC SERVICE

INTRODUCTION TO PERIODIC SERVICE

Importance of regular servicing for machine performance and longevity.

DRAINING AND CLEANING THE RECOVERY TANK

Procedures for emptying and cleaning the dirty water tank.

CLEANING THE ECO-SYSTEM

Steps to clear and clean the ECO-SYSTEM circuit.

DRAINING AND CLEANING THE SOLUTION TANK

How to drain and clean the clean water/detergent tank.

CHECKING BRUSHES OR ABRASIVE DISCS

Inspecting brushes and discs for wear and tear.

CLEANING THE DETERGENT SOLUTION FILTER

Guide to cleaning the filter in the detergent solution line.

CLEANING THE SQUEEGEE

How to clean the squeegee and check its blades.

REPLACING SQUEEGEE BLADES

Instructions for rotating or replacing squeegee blades.

REPLACING SPLASHGUARD BLADES

How to rotate or replace splashguard side and front blades.

CLEANING THE SOLUTION PIPE FITTING

How to clean the detergent solution pipe fitting if flow is obstructed.

CHECKING OR REPLACING FUSES

Guide to checking and replacing fuses on the switchboard.

FUSE REPLACEMENT DETAILS

Specific instructions for replacing various fuses like brush motors, drive system, control board.

CLEANING THE SUCTION FILTER

How to clean the air filter on the suction duct.

CHECKING THE COVER SEAL

How to check and clean the seal on the recovery tank cover.

RECHARGING BATTERIES

Instructions for safely recharging the machine's batteries.

CHECKING OR REPLACING DRIVE WHEEL REDUCER OIL

Procedures for checking and replacing oil in the drive wheel reducer.

DIMENSIONAL DRAWINGS

MACHINE DIMENSIONS

Technical drawings showing the overall dimensions of the machine.

TECHNICAL CHART

MACHINE SPECIFICATIONS

Detailed technical specifications of the scrubber-dryer.

RECOMMENDED SPARE PARTS

SPARE PARTS LIST

List of recommended spare parts for servicing operations.

TROUBLE-SHOOTING CHART

COMMON PROBLEMS AND SOLUTIONS

Identifies common issues and their corresponding solutions for the machine.

ADDITIONAL PROBLEMS AND SOLUTIONS

Further troubleshooting for less common issues and operational problems.

ALARMS AND DISPLAY INDICATIONS

CONTROL BOARD ALARM CODES

Explains alarm codes displayed on the control board and their causes/solutions.

PRODUCT WARRANTY

WARRANTY TERMS AND CONDITIONS

Details the warranty coverage, exclusions, and claim procedures.

INSTALLATION FORM FOR WARRANTY ACTIVATION

WARRANTY ACTIVATION FORM

Form to be filled for activating the machine's warranty.

DECLARATION OF CONFORMITY

CE CONFORMITY STATEMENT

Statement confirming the machine's compliance with relevant EU directives.

Related product manuals