EVCO | 06.08.2021 | AZ | 6114CP3OEE104
c-pro 3 OEM - Hardware manual
Introduction
c-pro 3 OEM is a range of programmable controllers in 8-DIN
modules, open-board or with housing (blind or with built-in LCD
display). It has numerous inputs and outputs (up to 21) and an
enhanced memory capacity to meet the management needs of the
HVAC/R sector and OEM companies in particular. The models with
Pulse outputs, for example, can be used to control multiplexed
cabinets.
Thanks to the INTRABUS protocol, advantageous point-to-point
solutions can be used, including the possibility of connecting to
remote LED (Vled 3) or LCD (EVJ LCD) user interfaces.
The CAN protocol makes it possible to increase the number of c-pro
3 OEM inputs/outputs by adding an expansion and to be integrated
with the entire range of c-pro 3 controllers and displays.
The MODBUS RTU option, used with an external interface, is always
available in both master and slave modes. Those models supplied
with the RS-485 enable two MODBUS protocols to be used at the
same time.
The application software can be designed in a simple, intuitive and
portable way thanks to the UNI-PRO 3 integrated development
environment. The USB port, supplied as standard, makes the
controller easy to program in the development phase and in
debugging and it can be updated using the most common USB ash
drives.
To Next Page
Loading...
Need help?
General
