Evco c-pro 3 OEM - Page 7

EVCO | 06.08.2021 | AZ | 7114CP3OEE104
c-pro 3 OEM - Hardware manual
Purchasing codes
Open frame version
Purchasing codes description
Features Codes
115... 230 VAC - Open frame version - 8 DIN modules - DIN guide- INTRABUS - CAN - USB EPB90
115... 230 VAC - Open frame version - 8 DIN modules - DIN guide - INTRABUS - RS-485 - CAN - USB - Real Time Clock EPB90R
115... 230 VAC - Open frame version - 8 DIN modules - DIN guide - Digital output Pulse - INTRABUS - RS-485 - CAN -
USB - Real Time Clock
EPB90V
The following table shows the available c-pro 3 OEM models, open frame version, and the relative purchasing codes
Features
Models
EPB90 EPB90R EPB90V
Power supply
115... 230 VAC • • •
Congurable inputs (analogue or digital)
Analogue input (PTC/NTC/Pt 1000) or digital input (dry contact) 4 4 4
Analogue input (NTC/0-5 V ratiometric/0-10 V/0-20 mA/4-20 mA) or
digital input (dry contact)
3 3 3
Digital inputs
Dry contact and for pulse trains up to 2 KHz 2 2 2
High voltage 2 2 3
Analogue outputs
0-10 V/PWM 4 4 4
Digital outputs (electro-mechanical relays; A res. at 250 VAC)
5 A SPST 4 4 4
8 A SPST 1 1 1
16 A SPDT 1 1 1
Digital outputs (Pulse)
230 VAC max. 30 W 1
User interface
None (open frame) • • •
Format
8 DIN modules • • •
Installation mode
DIN guide • • •
Connections
Screw terminal blocks • • •
Type A female USB connector • • •
Communication ports
INTRABUS 1 1 1
RS-485 MODBUS MASTER/SLAVE 1 1
CAN 1 1 1
USB 1 1 1
Other Features
Real Time Clock • •
For further informations look at chapter “Technical data”