5. PASSWD
Input the password if the SMTP server requires Authentication.
6. RECEIV. EMAIL ADDR
Input the e-mail address for receiving e-mail message when the EVENT is enabled and
triggered. For example: In Motion Setup Menu, if the “EMAIL/NETWORK” is set to
“YES”, this e-mail address will receive a text message and an “ARV” format of a still
image from DVR when Motion is triggered. This “ARV” file can be played back by
opening “DVRViewer.exe” that you downloaded from the DVR or the Remote Viewer
(Browser) or from the Copy Menu (labeled viewer).
7. SENDER EMAIL ADDR
Input sender’s e-mail address, so that receiver can recognize the sender when an event
message is sent out.
43
To Next Page
Loading...
