This is will be a Hot Gas Defrost or a Air Defrost cycle depending on the model, so the
fans will run at high speed. Once the Manual Defrost is complete by either Time or
Temperature, the screen will return automatically to the Home screen or it can be
terminated at any time by pressing the Red Stop button.
3.4. Heated Probe
The Heated Probe function is an option and it allows the end user to activate it by
pressing the Heated Probe icon. Once pressed the Product Probe will heat slightly, for
one minute (60 seconds), to allow it to be removed from frozen product without
damaging the probe.
To Next Page
Loading...