Need help?Do you have a question about the Everidge Thermalrite and is the answer not in the manual?
Essential steps to perform before operating the blast chiller for the first time.
Configure and manage the Hold function for maintaining product temperature.
Activate and manage the Thawing function for gentle heating of the cabinet.
Understand the Sterilization cycle using UV-Lamp for bacterial reduction.
Initiate and manage the Manual Defrost cycle for ice removal.
Activate the Heated Probe option for safe removal from frozen product.
Information on accessing Service Mode, primarily for technicians.
Change the user interface language from available options.
Configure the date and time for accurate HACCP data tracking.
Adjust screen brightness, minimum, maximum, and screen saver.
Import and export data using a USB drive for data management.
Procedure for updating the touch screen display software.
Procedure for updating the firmware for the Power Relay Board.
Load only parameter settings from a USB drive.
Procedure for updating both software and parameter settings.
Access and review a list of all alarms and their descriptions.
Review a history of all defrost cycles that have occurred.
View HACCP data graphs for cycles on selected dates.
Export HACCP information to a USB drive.
Load and track HACCP data using the Blast Chiller Tracer software.
Open and save HACCP .csv files in Excel for analysis.
Check real-time signals like temperature sensors and door status.
Change or set passwords to protect recipes and settings.
Access future storage of videos, manuals, parts lists, and maintenance info.
Understand the air temperature range for blast chilling and holding.
Choose between time-based or product-probe-based chilling cycles.
Defrost occurs automatically between chilling and hold cycles.
Initiate a blast chilling cycle after pre-chill is complete.
Manually set time, air temperature, and fan speed for chilling.
Utilize pre-programmed recipes for efficient product chilling.
Create and configure up to 4 custom recipes for specific products.
View and customize cycle graphs showing probe temperatures.
List of all alarms, their causes, and recommended solutions.
Monitor real-time input/output values and component status.
View voltage, power consumption, and battery status.
View the cycle end screen and automatic switch to Hold cycle.
Monitor Hold mode status, temperature limits, and defrost indicator.
Procedure for accessing the Service Menu, password protected.
Check or change internal parameters of the blast chiller.
List of control parameters for reference only.
Restore the control to its original parameter settings.
Review door opening events, duration, and critical temperature events.
Force board relays to activate and deactivate for testing.
Enter and confirm the serial number of the blast chiller.
Enable or disable features like Product Probe heating, Thawing, etc.
Reset lifetime counters or alarm lists for the machine.
Optimize touch screen performance for precise reaction to commands.
Verify touch command recognition accuracy after calibration.
General| Brand | Everidge |
|---|---|
| Model | Thermalrite |
| Category | Refrigerator |
| Language | English |
To Next Page