Evinrude E-Tec User Manual

74
Product Information
Readiness Test
The Operator’s Readiness Test....
1. Did you read this Guide from front cover to rear cover?
2. Are you ready to take responsibility for the safe operation of your boat and outboard?
3. Do you understand all the safety precautions and instructions contained in this Guide?
4. Do you understand that this Guide contains essential information to help prevent personal
injury and damage to equipment?
5. Are you ready to follow the recommendations in this Guide and take a boating safety
course before you operate your boat and outboard?
6. Do you know who to ask if you have any questions about your boat and outboard?
7. Do you know your local marine traffic laws?
8. Do you understand that human error can be caused by carelessness, fatigue, overload,
preoccupation, unfamiliarity of operator with the product, drugs and alcohol, just to name
a few?
WARNING
It is impossible for this Guide to cover every hazardous situation you may encoun-
ter; however, your understanding of and adherence to essential information con-
tained in this Guide will build good judgment when boating. Always be alert and
careful: a good foundation for safety.

Evinrude E-Tec Specifications

General

Starting System	Electric
Trim System	Power Trim and Tilt
Horsepower Range	25 HP - 300 HP (depending on model)
Weight	Varies by model
Bore x Stroke	Varies by model
Displacement	Varies by model
Gear Ratio	Varies by model
Alternator Output	Varies by model
Shaft Length	15", 20", 25", 30" (depending on model)
Oil Injection	Yes
Warranty	3 years
Engine Type	E-TEC Direct Injection 2-Stroke
Fuel Type	Gasoline