1
3
2
UNBOXING
/17
Locate and remove the smaller boxes containing the charger (1) and Saddle/
Battery (2) and place to the side. Set the front wheel to the side (3 ). Place
the bike in an upright position on soft ooring or a soft surface to avoid
scratching. Continue to remove the zip ties and foam from the bike.
Open the box. Be careful to not to damage the bike with sharp tools while
removing any packaging.
Your bike comes mostly pre-assembled, with the front wheel and handlebars
strapped to the frame of the bike. Lift the bike out of the box with another
person's assistance. Carefully remove the zip ties and foam from the bike.
NOTICE
DAMAGE OCCURRING FROM UNBOXING
OR ASSEMBLING IS NOT COVERED IN THE
WARRANTY.
To ensure your bike is ready to ride once assembled it is best practice
to charge your battery. To remove the battery from the seat. Please see
"REMOVING THE BATTERY" PAGE 35 and to charge the battery, please
see"CHARGING THE BATTERY" PAGE 36.
To Next Page
Loading...