Evolve PROJECT BMX - Pedals; Right Side

3
11
2
LEFT PEDAL IS REVERSE THREADED
AND MUST BE TIGHTENED COUNTER
CLOCKWISE
.
3
11
2
/24
PEDALS
Ensure you have the correct pedal. Identify the R on the threaded spindle of
the pedals (1). It is advised to heavily grease the threaded spindles before
installation.
Thread the spindle onto the crank arms by hand, ensure the threads of the
pedal match the grooves on your crank arm to avoid damage to the threads.
(2). Rotate the pedals toward the REAR of the bike to tighten the right side
pedals (3). Tighten further with a open-end wrench to ensure it is  tted
completely.
Ensure you have the correct pedal. Identify the L on the threaded spindle of
the pedals (1). It is advised to heavily grease the threaded spindles before
installation.
Thread the spindle onto the crank arms by hand, ensure the threads of the
pedal match the grooves on your crank arm to avoid damage to the threads.
(2). Rotate the pedals toward the REAR of the bike to tighten the left side
pedals (3). Tighten further with a open-end wrench to ensure it is  tted
completely.
RIGHT SIDE
LEFT SIDE
NOTICE
LEFT PEDAL IS REVERSE THREADED AND
MUST BE TIGHTENED COUNTER CLOCKWISE.