TAIL LIGHT
The Walk Assistance function propels the bike
forward at slow speeds when you are walking
alongside it. This mode is ideal when walking
your bike up hills.
To activate Walk Assist,
Ensure you have your hands on your handlebars
and the bike is motionless.
Brie y press Minus (-) button until the Walk
Assistance Indicator is displayed.
Hold down the Minus (-) button while walking
alongside the bike. The Walk Assistance
Indicator will ash.
To turn off, release the button or the function will
automatically turn off. If no further operations
occur within 5s the bike will automatically return
to 0 level.
Your battery pack is equipped with a rear tail
light for safety measures.
To activate the tail light;
Hold the Plus (+) button for 2 seconds. The light
icon will appear on the Display when activated.
Press and hold to cycle through Light modes.
ON STEADY > FLASH SLOW > FLASH FAST >
OFF
Hold the Plus (+) button for 2 seconds again to
turn off the tail light.
1 2
0 0
PRESS
2SEC
1 2
0 0
PRESS
1 SEC
WALK ASSIST
/40
To Next Page
Loading...