EWM Tetrix 350 - Options; Simultaneous Welding on both Sides, Synchronisation Types; Synchronisation Via Cable (Frequency 50 Hz to 200 Hz); Synchronisation Via Mains Voltage (50 Hz; 60 Hz)

Accessories
Options
110
099-004854-EW501
19.02.2014
9.5 Options
Type
Designation
Item no.
ON 7pol
Optional 7-pole retrofit connection socket
Accessory components and digital interfaces
092-001826-00000
ON Key Switch
Optional retrofit kit for key switch
092-001828-00000
ON 19POL Tetrix 300/351
Optional 19-pole retrofit connection socket
Accessory components and analogue A interface
092-001827-00000
ON FILTER TETRIX 350
AC/DC
Retrofit option, dirt filter for air inlet
092-002392-00000
9.6 Simultaneous welding on both sides, synchronisation types
9.6.1 Synchronisation via cable (frequency 50Hz to 200Hz)
NOTE
For simultaneous, two-sided welding according to the master/slave principle, both
welding machines must be fitted with the 19-pole connection socket (ON 19POL) (Note
different retrofitting options depending on the machine type).
Type
Designation
Item no.
SYNINT X10 19POL
Synchronisation set incl. interface and connector
cable
090-008189-00000
RA10 19POL 10M
Remote control e.g. connection cable
092-001470-00010
9.6.2 Synchronisation via mains voltage (50Hz / 60Hz)
Type
Designation
Item no.
ON Netsynchron 351/451/551
Optional retrofit set for phase sequence changeover
for synchronous welding
090-008212-00000
9.7 Computer communication
Type
Designation
Item no.
PC300.Net
PC300.Net welding parameter software kit incl.
cable and SECINT X10 USB interface
090-008777-00000
CD PC300.Net update
PC300.Net Update on CD-ROM
092-008172-00001