FPM-600/FLS-600 22
4. Press to include/exclude the displayed wavelength.
5. Edit the wavelength value as follows:
5a. Hold down a few seconds. The first digit of the wavelength blinks.
5b. Clear all digits by holding down for a few seconds.
AND/OR
Select a digit to change by holding until it blinks, then (it increase its value
by pressing returns to 0 after 9).
5c. While a digit blinks, hold down for a few seconds to save the
modified value (it remains in memory even when you turn off the
unit) or press to return to the previous value without saving.
6. Press twice to exit setup menus.
Measuring Power or Loss (FPM-600)
Defining a List of Favorite Wavelengths
To Next Page
Loading...
