Remote Control Commands
Variable Attenuator 91
Specific commands-Quick Reference Command Tree
ATTenuation
Description This command sets the attenuation to a specific value. The valid
range of values depends on the configuration of the FVA-3100
and on the current wavelength. The resolution of the value is
0.005 dB for singlemode models and 0.01 dB for multimode
models.
Syntax ATT<wsp><value>[<wsp>DB]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
