Setting Up Your Variable Attenuator
38 FVA-3100
Saving and Recalling a Configuration
2. Press the left/right arrows until RECALL is displayed.
3. Press ENTER. The configuration number (bottom of the screen) will
start flashing.
4. Use the up/down arrows to select the number of the configuration you
want to recall.
5. Press ENTER.
6. To exit the Setup menu, press on the Setup button.
Configuration number
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
