MaxTester Copper Test 223
13 Copper Auto Tests
Main Menu
Auto Test allows you to automatically run tests used in
pre-qualification, installation, and maintenance of
different circuit types from POTS to VDSL2. The main
menu allows you to select and run the displayed tests:
POTS Auto Test detects the loop current and
measures voice frequency parameters in a copper
telephone loop.
User Auto Test runs a range of different
user-defined tests.
To start/stop a test:
1. Press the left/right arrow keys on the keypad to select the desired test
icon.
2. Press to confirm your selection.
3. The test will start automatically if the Setup/Application Settings - Test
Startup Mode is set to Auto. If not, press Start/Stop on the keypad.
To Next Page
Loading...
