MaxTester Copper Test 35
5 Setting Up Copper Tests
The MaxTester is designed to test basic twisted pair quality, identify and
locate faults, and troubleshoot noise and signal issues. These
measurements offer a quick and thorough method to determine if the
cable is capable of supporting xDSL technology. In addition, it utilizes noise
measurements, longitudinal balance tests, and power spectral density tests
to assist in the installation, maintenance, and troubleshooting of copper
cables.
Copper Test Main Menu
Copper Main presents the main copper menu page
which allows you to navigate between all the copper
qualification testing applications using the up/down,
left/right arrow keys on the keypad.
Press to run a test, bring up the sub-menu, or
perform the application of the selected icon.
To Next Page
Loading...
