Expobar BRILLIANCE - Machine Parameters Settings

Brilliance Manual
Page 11
5.8 Machine Parameters Menu
After the doses menu, we arrive to the Machine Parameters menu:
In this menu we will be able to adjust important parameters of the machine.
Pressing the “Enter” button, we get into the menu and the display shows the first parameter
available to be adjusted:
5.8.1 Language:
With buttons “+” and “-“ we select the different languages; with “enter” we accept the selected
language, and proceed to the next adjustment.
5.8.2 Boiler Temperature units
This parameter sets the units for the temperature of the boiler. With buttons “+” and “-“ we change
between Celsius “ºC” and Fahrenheit “ºF”; with “enter” we accept the selected language, and
proceed to the next adjustment.
5.8.3 Boiler Temperature
In this screen we can see the actual temperature of the boiler, and adjust the temperature that we
wish for it. On the left of the display the actual temperature of the boiler can be seen. On the right
hand and flashing, the temperature to which we wish to adjust the boiler. With buttons “+” and “-“
we adjust this setting; with “enter” we accept the value, and proceed to the next adjustment.
The temperature can be set between 60 and 107ºC. The adequate temperature depends on the type
of coffee beans that will be used in the machine. A recommended value is 97ºC.
5.8.4 Stand-by state
After the machine has been idle for 4 minutes, to compensate the loss of temperature in the espresso
group, the temperature of the boiler will be increased accordingly with this parameter. This is the
“StandBy DT”, which can be adjusted between 0 and 5ºC. With buttons “+” and “-“ we adjust this
setting; with “enter” we accept the value, and proceed to the next adjustment.
MACHINE PARAM.
LANGUE
FRANCAIS
LINGUA
ITALIANO
SPRACHE
DEUTSCH
LENGUA
ESPANOL
+
+
+
+
-
-
-
-
Enter
Canc
LANGUAGE
ENGLISH
Enter
Temperature
ºF
Temperature
ºC
Enter
Canc
+
-
Enter
T.act.= Actual Boiler Temperature
Set Temp= Temp. to which boiler is set
Boiler Temperat.
T.act. Set Temp
Canc
Enter
Enter
Recomended 97ºC
StandBy DT.
Set DT
Canc
Enter
Enter
Recomended 4ºC