Expobar BRILLIANCE - Price Setting and Coin Validator Values; Routine Cleaning Functions

Brilliance Manual
Page 14
5.9.3 Prices setting
Now it comes the adjusting of each selection’s price. On the first row of the display we see which
selection price (from 1 to 9) we are adjusting. At the second row, we see the price assigned to it.
With buttons “+” and “-“ we adjust this value; with “enter” we accept the value, and proceed to the
next. After accepting the price setting for the last selection, we will begin with the next setting.
5.9.4 Coin value (lines) setting
At this point the 6 comunications lines with the coin validator will be adjusted. Each value has to
match the set value of the validator mechanism. With buttons “+” and “-“ we adjust this values;
with “enter” we accept the value set, and proceed to the next.
When we are finished adjusting the line values, and accept the last setting, the superior menu will
appear again.
5.10 Rinsing
The rinsing function facilitates a utility for a routine cleaning of the outlet conducts of the machine.
This utility flushes the different outlet conducts of the machine, beginning on the mixer conducts,
and finishing by the espresso group conducts.
Just press “enter” to execute this function, and wait till the cycle is over. The
process can be canceled by pressing “canc”.
This function takes about 1min 15secs, and pours around 150cc of water.
5.11 Emptying airbreak
As to facilitate small transportations / movements of the machine, a function is available as to
reduce the amount of water in the AirBreak (the small, inner, open-air deposit), avoiding the
dripping inside the machine when moving.
To execute the function just press “enter”. The process can be canceled by pressing
“canc”. When finished “EMPTYING completed” will be shown on the screen. To
return to normal functioning of the machine, turn off and again on the power.
Warning: Never use this function with empty airbreak. Making the pump work without water, will
damage it in a very short time.
Dose Price N
#
Enter
Canc
Enter
Dose Price N
#
Enter
Canc
Enter
...
...
Enter
Line Value 1
#
Enter
Canc
Line Value N
#
Enter
Canc
Enter
...
...
RINSING
EMPTYING