Brilliance Manual
Page 20
7.3 Reassembly of mixer system
7. Reassemble the assembly
plate by turning
lock knob (F) clockwise.
INSPECT gaskets.
8. Make sure that the motor
whippers plane side will be
in accordance with the
whippers plane side. see next
(G) and picture (H)
.
9. Assemble whipper , pull
until you hear a clicking noise.
(H).
10.Assemble mixer bowl
and steam
trap (J) see picture. Pay
attention to the steam trap to
be well oriented towards its
hole in the chasis.
11. Easily push the mixer
bowl towards, according
to (K) and lock with lock
knob (L).Connect outlet
hose (M). (NOTE! make
sure that all water hose
are connected at right
place
INSPECT
INSPECT
(H)
(J)
(J)
(J)
(K)
(L)
(M)
To Next Page
Loading...
