Brilliance Manual
Page 21
7.4 Removing the espresso group
To remove the espresso group follow the following steps:
7.4.1 Push
down
Spout
holder
As to allow the
maximum free
place to work,
move down the
Spout holder:
7.4.2 Release
the espresso
conduct
Release the espresso
conduct from the
espresso group:
7.4.3 Release the Holding Hooks
Push each hook inwards and rotate it till the long leaf points upwards. This frees the group.
7.4.4 Remove the group
Pull out the group, being careful with the
grinded coffee doser, and the mixer conducts.
To Next Page
Loading...
Need help?
General
