Maintenance
12
12.1 Battery Replacement
If the supplied rechargeable 3.7 lithium battery needs to be replaced, contact
customer support; see the Customer Support section for contact information.
Replace the battery if it will not hold a charge or exhibits unusual behavior
(overheating, warping, leaking, etc.). Please dispose of battery responsibly,
following all applicable regulations; contact customer support if you require
assistance.
12.2 Cleaning
To clean the body of the RH600 meter and the RH601 probe, use a lightly
dampened, lint-free cloth. Use a mild detergent, if necessary. Dry the unit
completely before use. Do not use abrasives or solvents to clean any area of
the meter.
To clean the display, use a soft cloth moistened with a high quality lens
cleaner to gently wipe the glass. The display can be scratched if wiped with a
rough material.
#NAS100113; r. AA/87024/87024; en-US
31
To Next Page
Loading...
Need help?
General
