IN1606 and IN1608 Series Scaling Presentation Switcher • Reference Information 125
Downloading Updated Firmware
Figure 93. Downloading Firmware from the Extron Website
1. On the Extron website, click the Download tab (see figure 93,
1
).
2. From the left sidebar, click the Firmware link (
2
).
3. Navigate to the IN1606 or IN1608 model (
3
).
4. Ensure the available firmware version is a later version than the current one on the
device.
NOTE: The firmware release notes provide details about the changes between
different firmware versions. The file can be downloaded from the same page as the
firmware.
5. Click the Download link (
4
) to the right of the desired device.
6. Submit required information to start the download. Note where the file is saved.
7. From the save location, open the executable (.exe) file.
8. Follow the instructions on the Installation Wizard screens to install the new firmware on
the computer. A Release Notes file, giving information on what has changed in the new
firmware version, and a set of instructions for updating the firmware are also loaded.
9. Use Extron Firmware Loader, the internal Web pages (see Update Firmware Page on
page 118), or the Product Configuration Software to upload firmware from the PC to the
scaler.
To Next Page
Loading...
Need help?
General
