Need help?Do you have a question about the Extron electronics IN1606 series and is the answer not in the manual?
General| Brand | Extron electronics |
|---|---|
| Model | IN1606 series |
| Category | Media Converter |
| Language | English |
General safety guidelines and warnings for product operation and maintenance.
Lists and describes the main features of the scalers, covering video, audio, general, and control aspects.
Instructions for connecting AC power and various video/audio input sources.
Details on connecting display devices to the scaler's HDMI and TP outputs.
Explains how to navigate and use the OSD menu for device setup and configuration.
Explains how to configure and control the scaler using Extron Simple Instruction Set (SIS) commands.
Commands for selecting video and audio inputs and configuring auto switch modes.
Commands for setting input video format, EDID, and input naming.
Commands for adjusting video parameters like mute, color, tint, contrast, brightness, detail, and position.
Commands for configuring output rate, HDMI format, power save, and screen saver settings.
Commands for setting audio input formats, levels, and muting.
Commands for saving, recalling, renaming, and deleting input and user presets.
Commands for test patterns, freeze, video effects, aspect ratio, and front panel lockout.
Commands for configuring IP settings, DHCP, subnet mask, gateway, and MAC address.
Steps for downloading and installing the Extron Product Configuration Software (PCS).
Options for uploading firmware files to the connected device or multiple devices.
How to access and navigate the scaler's web-based interface via a browser.
Controls AV settings like input selection, auto-image, mute, and freeze.
Access to input/output configuration, EDID, image settings, and audio settings.
Configures input naming, signal type, aspect ratio, Auto-Image, Auto Memory, and HDCP.
Controls output resolution, refresh rate, HDMI format, and switch transitions.
Manages EDID information between the scaler and input sources.
Adjusts signal sampling, picture controls, presets, and overscan settings.
Configures audio inputs, outputs, mixing, and listening levels.
Configures phantom power, high pass filter, ducking, and gain for microphone inputs.
To Next Page
