IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 64
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Passwords
NOTE: Passwords may be hidden (for example, ******) on certain host devices.
Set administrator password
EX5@CA} Ipa•X5@]
Set the administrator password to
X5@.
Read administrator
password
ECA} X5@]
View the administrator password.
Reset (clear) administrator
password
E•CA} Ipa•]
Reset or clear the administrator
password.
Set user password
EX5@CU} Ipu•X5@]
Set the user password.
Read user password
ECU} X5@]
View the user password.
Reset (clear) user password
E•CU} Ipu•]
Reset or clear the user password.
Verbose mode
Set verbose mode
EX5#CV} VrbX5#]
Enable or disable verbose mode and
tagged responses, where additional
information is provided in response to
a query.
View verbose mode
ECV} X5#]
View the verbose mode.
NOTES:
X5@ = Password
Up to 12 digits and alphanumeric characters (no
/ \ | * or
space)
X5# = Verbose mode
0 = clear or none (default for Telnet connections)
1 = verbose mode (default for RS-232 connections)
2 = tagged responses for queries
3 = verbose mode and tagged queries
To Next Page
Loading...
Need help?
General
