Extron electronics XTP II CrossPoint 6400 User Manual

About the XTP II CrossPoint Switchers
The XTP II CrossPoint matrix switchers are configurable, modular matrix switchers that
distribute a variety of video, audio, and data types, depending on how it is configured. A
matrix switcher routes any input signal to any combination of outputs. It can route multiple
input and output configurations simultaneously.
The XTP II CrossPoint models are assembled from user-installed and hot-swappable input
and output boards in the following quantities:
• XTP II CrossPoint 1600 — Supports up to four input boards and four output boards.
• XTP II CrossPoint 3200 — Support up to eight input boards and eight output boards.
• XTP II CrossPoint 6400 — Support up to 16 input boards and 16 output boards.
Table 1 identifies the various types of input boards and output boards currently available,
each of which can receive (input boards) or output (output boards) up to four signals (see
Input and Output Boards and Signal Types on page 4 for details).
Input Boards Output Boards
XTP CP 4i (XTP input board) XTP CP 4o (XTP output board)
Receives inputs from Extron XTP transmitters and local
serial port and IR inserts.
Outputs signals to Extron XTP receivers. Includes local
serial port and IR inserts.
XTP CP 4i Fiber 4K (fiber optic input board) XTP CP 4o Fiber 4K (fiber optic output board)
Receives fiber optic and local serial port and IR inserts. Outputs fiber optic outputs. Includes local serial port
and IR inserts.
XTP II CP 4i HD 4K PLUS (HDMI
®
input board) XTP II CP 4o HD 4K PLUS (HDMI output board)
Receives 4K HDMI signals and analog audio inputs. Outputs 4K HDMI and analog audio outputs. Output is
HDCP-compliant if the input is HDCP-compliant.
XTP CP 4i HDMI (HDMI
®
input board) XTP CP 4o HDMI (HDMI output board)
Receives HDMI signals and analog audio inputs. Outputs HDMI and analog audio outputs. Output is
HDCP-compliant if the input is HDCP-compliant.
XTP CP 4i DVI Pro (DVI Pro input board) XTP CP 4o DVI Pro (DVI Pro output board)
Receives DVI Pro signals and analog audio inputs. Outputs DVI Pro signals and analog audio outputs.
XTP CP 4o SA (Analog audio output board)
Outputs analog audio outputs.
XTP CP 4i 3G-SDI (3G-SDI input board)
Receives 3G, HD-SDI, and SDI video inputs and analog
audio inputs.
XTP CP 4i VGA (universal analog VGA input board)
Receives RGBHV, RGBs, RGsB, HDTV and YUV
component video, S-video and composite video analog
inputs and analog audio inputs.
Table 1.
Available Input and Output Boards
The input boards convert their non-XTP inputs into the digital XTP format used by Extron
XTP transmitters and receivers and place them on the switcher backplane. The output
boards with non-XTP outputs convert the XTP signal to the appropriate format for that
output board type. Thus, as a system, the XTP II CrossPoint switchers can transcode inputs
in any valid format to the output formats supported by the family of output boards, making
them single box solutions to complex digital video signal routing applications. Each input
and output is individually isolated and buffered, and any input can be switched to any one or
all outputs with virtually no crosstalk or signal noise between channels.
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Introduction 2

Extron electronics XTP II CrossPoint 6400 Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint 6400
Category	Matrix Switcher
Language	English