FAAC 400 Series User Manual

400 3 732871 - Rev. D
Translation of the original instructions
ENGLISH
PERSONAL PROTECTIVE EQUIPMENT
Personal protective equipment must be worn to protect against hazards (e.g. crushing,
cutting, shearing etc.):
Obligation to wear safety footwear.
Obligation to wear mask/goggles to protect the eyes from the risk of
fragments due to the use of the drill or welder, or risk of contact with oil,
battery fluids or other substances.
Obligation to wear work gloves.
Obligation to wear work clothes without parts that could become caught
in moving parts.
MARKINGS ON PACKAGING
Handle with care. Presence of fragile parts.
This way up: DO NOT turn over.
Store away from water and humidity.
Read the instructions.
Obligation to wear safety footwear.
Percent storage humidity.
Storage temperature.
RECYCLE and DISPOSE of at authorised waste collection centres.
DO NOT stack pallets.
6
Maximum number of stacked packages.
TOOLS (type and size)
2, 3, 5
Hex wrench of the size indicated in figures (6, 8...)
13, 14, 17
Hex key of the size indicated in figures (6, 8...)
Level
8
Metal drill bit of the size indicated in figures (6, 8...)
Angle grinder
Welder
1, 4, 8
PHILLIPS SCREWDRIVERS of the size indicated in figures (6, 8...)

FAAC 400 Series Specifications

General

Operating Temperature	-20°C to +55°C
Protection Class	IP54
Model	400 Series
Protection Rating	IP54
Voltage	230 Vac
Power Supply	230V AC
Usage	Residential
Motor Type	Electromechanical
Safety Features	Obstacle detection