Fagor CNC 8060 - Chapter 7 Remote Module Rcs-S. (Sercos Protocol); Module Description

·118·
Remote modules
CNC 8060
CNC 8065
7.
(REF: 1402)
REMOTE MODULE RCS-S. (SERCOS PROTOCOL)
7.2 Module description.
·Boot· button.
Connector ·A22·.
24 V supply input.
Connector ·E21A·.
Feedback input.
·Reset· button.
Connector ·E21B·.
Feedback input.
Connector ·B32·.
Sercos bus connection.
Connector ·E21C·.
Feedback input.
Selector ·S38·.
Address (node) of the element within
the Sercos bus.
Switch ·S39·.
Switch for Sercos setting.
Display ·D40·.
Error display.
Connector ·E21D·.
Feedback input.
Connector ·I37A·.
2 general purpose analog outputs.
Connector ·I37B·.
2 general purpose analog outputs.
Bottom view.
Connector ·H53·.
RS232 serial line.
Ground connection.