Fagor CNC 8060 - Chapter 6 Remote Module Rior. (Canopen Protocol); Dimensions and Mounting of the Module

·108·
Remote modules
CNC 8060
CNC 8065
6.
(REF: 1402)
REMOTE MODULE RIOR. (CANOPEN PROTOCOL).
6.1 Dimensions and mounting of the module.
The RIOR module, meeting the standard EN 60529, corresponds to the IP00 classification,
so it must be mounted inside an electrical cabinet that provides at least IP54 protection.
Module dimensions.
DO NOT make any connection or connect any module to the power supply while the latter is turned
on. Before making any connection, turn the power supply off by unplugging the power cable.
150
272
256
120
36,5
R3,5
R6,5
R3,5