Remote modules. RIO5, RIOW and RIOR series.
CNCelite
8058 8060
8065 8070
ꞏ5ꞏ
REF. 2107
ABOUT THIS MANUAL.
Title. Remote modules.
Models. CNCelite
8058 8060
8065 8070
Type of documentation. OEM manual. This manual describes the available remote modules;
models, dimensions, connectors, etc.
Remarks.
Always use the manual reference associated with the software version
or a later manual reference. You can download the latest manual
reference from the download section on our website.
Limitations.
The availability of some of the features described in this manual are
dependent on the acquired software options. Moreover, the machine
manufacturer (OEM) customizes the CNC performance of each
machine using the machine parameters and the PLC. Because of this,
the manual may describe features that are not available for the CNC
or the machine. Consult the machine manufacturer for the available
features.
Electronic document. man_elite_58_60_65_70_rios.pdf. Manual available from the
download section of our website.
Language. English [EN]. Refer to our website, download area, the languages
available for each manual.
Date of publication. July, 2021
Manual reference Ref. 2107
Associated version. v2.00.01
Responsibility exemption. The information described in this manual may be subject to changes
due to technical modifications. Fagor Automation reserves the right to
change the contents of this manual without prior notice.
Trademarks. This manual may contain third-party trademarks or trade names,
however, they do not have them associated ® or ™ symbols. All the
trade marks appearing in the manual belong to the corresponding
owners. The use of these marks by third parties for their own purpose
could violate the rights of the owners.
Website / Email. http://www.fagorautomation.com
Email: info@fagorautomation.es
To Next Page
Loading...
Need help?
General
